Blue Cat Freq Analyst Multi Version 2.3 Including serial - Win x86 x64

June 24, 2019, 4:22 am

≫ Next: Blue Cat Freq Analyst Multi Version 2.3 Including serial - Mac

≪ Previous: capella-software capella v8.0.10.2

$

0

0

VST - VST3 - AAX | 114 MB
Blue Cat's FreqAnalyst Multi is a unique multiple tracks real time spectrum analyzer: it lets you visualize the spectral content of several audio tracks on the same screen with extreme smoothness and high resolution, for both time and frequency. It is the ideal solution for mixing: you can use it as a frequency overlap detector and actually see which part of the spectrum every single instrument uses.

---

Blue Cat Freq Analyst Multi Version 2.3 Including serial - Mac

June 24, 2019, 4:30 am

≫ Next: Sonex Audio Synthesizers KONTAKT

≪ Previous: Blue Cat Freq Analyst Multi Version 2.3 Including serial - Win x86 x64

$

0

0

VST / AU / AAX AAX | 56.7 MB
Blue Cat's FreqAnalyst Multi is a unique multiple tracks real time spectrum analyzer: it lets you visualize the spectral content of several audio tracks on the same screen with extreme smoothness and high resolution, for both time and frequency. It is the ideal solution for mixing: you can use it as a frequency overlap detector and actually see which part of the spectrum every single instrument uses.

Sonex Audio Synthesizers KONTAKT

June 24, 2019, 4:31 am

≫ Next: Blue Cat MB7 Mixer v. 3.3 - Including serial - Win x86 x64

≪ Previous: Blue Cat Freq Analyst Multi Version 2.3 Including serial - Mac

$

0

0

KONTAKT - 11,83 GB
Legendary Synthesizers: Yamaha DX7, Korg M1, Korg N5, Korg Trinity, Clavia Nord Wave, Clavia Nord Stage, Clavia Nord Modular and Ensoniq TS12.

Blue Cat MB7 Mixer v. 3.3 - Including serial - Win x86 x64

June 24, 2019, 4:44 am

≫ Next: Blue Cat MB7 Mixer v. 3.3 - Including serial - Mac

≪ Previous: Sonex Audio Synthesizers KONTAKT

$

0

0

VST - VST3 - AAX | 252 MB

Blue Cat's MB-7 Mixer is a unique plug-in that splits the signal into several frequency bands and lets you mix and process them as if they were separate tracks.

Each band proposes controls that can be found on a mixing console, and more: bypass, mute or solo each band separately to isolate frequencies you want to work on, adjust the gain, the "stereoness" and the position in the stereo field. When manipulating the stereo image, a master mono switch also lets you check mono compatibility.

Blue Cat MB7 Mixer v. 3.3 - Including serial - Mac

June 24, 2019, 4:54 am

≫ Next: NCH MixPad Masters Edition v5.48 Beta

≪ Previous: Blue Cat MB7 Mixer v. 3.3 - Including serial - Win x86 x64

$

0

0

AAX / AU / VST / VST3 | 391 MB

Blue Cat's MB-7 Mixer is a unique plug-in that splits the signal into several frequency bands and lets you mix and process them as if they were separate tracks.

Each band proposes controls that can be found on a mixing console, and more: bypass, mute or solo each band separately to isolate frequencies you want to work on, adjust the gain, the "stereoness" and the position in the stereo field. When manipulating the stereo image, a master mono switch also lets you check mono compatibility.

NCH MixPad Masters Edition v5.48 Beta

June 24, 2019, 5:10 am

≫ Next: Blue Cat Patch Work v. 2.4 including serial - Win x86 x64

≪ Previous: Blue Cat MB7 Mixer v. 3.3 - Including serial - Mac

$

0

0

P2P | 24 June 2019 | 2.68 MB
With MixPad multi-track recording and mixing software, you can access all the power of professional recording and mixing equipment through a single platform that streamlines the process and makes mixing a breeze.

Blue Cat Patch Work v. 2.4 including serial - Win x86 x64

June 24, 2019, 5:12 am

≫ Next: Blue Cat Patch Work v. 2.4 including serial - Mac

≪ Previous: NCH MixPad Masters Edition v5.48 Beta

$

0

0

VST - VST3 - AAX | 252 MB
Blue Cat's PatchWork is a universal plug-ins patchbay that can host up to 64 VST, VST3, Audio Unit or built-in plug-ins into any Digital Audio Workstation (DAW) in one instance.

It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently.

Blue Cat Patch Work v. 2.4 including serial - Mac

June 24, 2019, 5:14 am

≫ Next: MAGIX Fastcut Plus Edition v3.0.3.116

≪ Previous: Blue Cat Patch Work v. 2.4 including serial - Win x86 x64

$

0

0

AAX / AU / VST / VST3 | 391 MB
Blue Cat's PatchWork is a universal plug-ins patchbay that can host up to 64 VST, VST3, Audio Unit or built-in plug-ins into any Digital Audio Workstation (DAW) in one instance.

It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently.

---

MAGIX Fastcut Plus Edition v3.0.3.116

June 24, 2019, 5:38 am

≫ Next: Blue Cat OscilloscopeMulti v. 2.3 including serial - Win x86 x64

≪ Previous: Blue Cat Patch Work v. 2.4 including serial - Mac

$

0

0

P2P | 24 June 2019 | 692 MB
Fastcut Plus Edition - The fastest action cam software Celebrate adventure: Turn your breathtaking experiences into exciting video clips with music. It's that easy! Select recordings, apply template, and Fastcut does the rest.

Blue Cat OscilloscopeMulti v. 2.3 including serial - Win x86 x64

June 24, 2019, 7:26 am

≫ Next: Blue Cat OscilloscopeMulti v. 2.3 including serial - Mac

≪ Previous: MAGIX Fastcut Plus Edition v3.0.3.116

$

0

0

VST - VST3 - AAX | 116 MB
Blue Cat's Oscilloscope Multi is a unique multiple tracks real time waveform renderer and comparator: it lets you visualize the content of several audio tracks on the same screen and compare them thanks to its X-Y view.

Blue Cat OscilloscopeMulti v. 2.3 including serial - Mac

June 24, 2019, 7:28 am

≫ Next: Tonelib : Tonelib ZOOM v3.8.5 Win/Mac/Linux [FREE]

≪ Previous: Blue Cat OscilloscopeMulti v. 2.3 including serial - Win x86 x64

$

0

0

AAX / AU / VST / VST3 | 56.6 MB
Blue Cat's Oscilloscope Multi is a unique multiple tracks real time waveform renderer and comparator: it lets you visualize the content of several audio tracks on the same screen and compare them thanks to its X-Y view.

Tonelib : Tonelib ZOOM v3.8.5 Win/Mac/Linux [FREE]

June 24, 2019, 7:29 am

≫ Next: Tonelib: ToneLib GFX v3.9.0 WiN/Mac/Linux [FREE]

≪ Previous: Blue Cat OscilloscopeMulti v. 2.3 including serial - Mac

$

0

0

Win/Mac/Linux|11 MB
ToneLib ZOOM is an application that is compatible with some ZOOM effect pedals (see the Supported Devices list). Using this app, you can manipulate the pedal’s effects through your computer.
Important terms in ToneLib
The On/Off status and parameter settings of each effect are stored as "Patches." Use the patches to recall and save effects.

Tonelib: ToneLib GFX v3.9.0 WiN/Mac/Linux [FREE]

June 24, 2019, 7:31 am

≫ Next: Tonelib : ToneLib Jam v3.9.0 Win/Mac/Linux [FREE]

≪ Previous: Tonelib : Tonelib ZOOM v3.8.5 Win/Mac/Linux [FREE]

$

0

0

Win/Mac/Linux|25 MB
Tonelib GFX is an amp and effects modeling software for electric guitar and bass. The Tonelib GFX features accurate recreations of vintage and modern amplifiers, speaker cabinets, microphones, and effects. The Tonelib GFX also supports 3rd party impulse responses (IRs), offering even greater tonal flexibility. The Tonelib GFX plug-in features broad compatibility with popular DAWs, offering powerful 64-bit performance on AU, VST and VST3 platforms.

Tonelib : ToneLib Jam v3.9.0 Win/Mac/Linux [FREE]

June 24, 2019, 7:32 am

≫ Next: Tonelib : Tonelib ZOOM v3.8.5 Win/Mac/Linux [FREE]

≪ Previous: Tonelib: ToneLib GFX v3.9.0 WiN/Mac/Linux [FREE]

$

0

0

Win/Mac/Linux|45 MB
The Tonelib JAM is a software for creating, editing, printing and listening to tablature and sheet music for guitar and other fretted instruments. You can use Tonelib JAM for regular guitar practicing, for learning songs or for advancing your performance skills to the next level. The Tonelib JAM makes it easy to create backing tracks from just about any song. The internal player lets you change the playback tempo while keeping the same pitch and has facilities to loop a section of the music.

Tonelib : Tonelib ZOOM v3.8.5 Win/Mac/Linux [FREE]

June 24, 2019, 7:29 am

≫ Next: Tonelib: ToneLib GFX v3.9.0 WiN/Mac/Linux [FREE]

≪ Previous: Tonelib : ToneLib Jam v3.9.0 Win/Mac/Linux [FREE]

$

0

0

Win/Mac/Linux|11 MB
ToneLib ZOOM is an application that is compatible with some ZOOM effect pedals (see the Supported Devices list). Using this app, you can manipulate the pedal’s effects through your computer.
Important terms in ToneLib
The On/Off status and parameter settings of each effect are stored as "Patches." Use the patches to recall and save effects.

---

Tonelib: ToneLib GFX v3.9.0 WiN/Mac/Linux [FREE]

June 24, 2019, 7:31 am

≫ Next: Tonelib : ToneLib Jam v3.9.0 Win/Mac/Linux [FREE]

≪ Previous: Tonelib : Tonelib ZOOM v3.8.5 Win/Mac/Linux [FREE]

$

0

0

Win/Mac/Linux|25 MB
Tonelib GFX is an amp and effects modeling software for electric guitar and bass. The Tonelib GFX features accurate recreations of vintage and modern amplifiers, speaker cabinets, microphones, and effects. The Tonelib GFX also supports 3rd party impulse responses (IRs), offering even greater tonal flexibility. The Tonelib GFX plug-in features broad compatibility with popular DAWs, offering powerful 64-bit performance on AU, VST and VST3 platforms.

Tonelib : ToneLib Jam v3.9.0 Win/Mac/Linux [FREE]

June 24, 2019, 7:32 am

≫ Next: Blue Cat Stereo Scope Multi v. 2.3 including serial - Win x86 x64

≪ Previous: Tonelib: ToneLib GFX v3.9.0 WiN/Mac/Linux [FREE]

$

0

0

Win/Mac/Linux|45 MB
The Tonelib JAM is a software for creating, editing, printing and listening to tablature and sheet music for guitar and other fretted instruments. You can use Tonelib JAM for regular guitar practicing, for learning songs or for advancing your performance skills to the next level. The Tonelib JAM makes it easy to create backing tracks from just about any song. The internal player lets you change the playback tempo while keeping the same pitch and has facilities to loop a section of the music.

Blue Cat Stereo Scope Multi v. 2.3 including serial - Win x86 x64

June 24, 2019, 7:49 am

≫ Next: Blue Cat Stereo Scope Multi v. 2.3 including serial - Mac

≪ Previous: Tonelib : ToneLib Jam v3.9.0 Win/Mac/Linux [FREE]

$

0

0

VST - VST3 - AAX | 114 MB
Blue Cat's StereoScope Multi is a unique tool to compare the stereo image of several tracks in real time. It is the ideal solution for mixing: you can actually see which part of the stereo field every single instrument uses. It can also be used to analyze an effect chain and see how audio effects influence the stereo image of your content.

Blue Cat Stereo Scope Multi v. 2.3 including serial - Mac

June 24, 2019, 7:51 am

≫ Next: Nico Chiara The Soprano Kit WAV

≪ Previous: Blue Cat Stereo Scope Multi v. 2.3 including serial - Win x86 x64

$

0

0

AAX / AU / VST / VST3 | 55.2 MB
Blue Cat's StereoScope Multi is a unique tool to compare the stereo image of several tracks in real time. It is the ideal solution for mixing: you can actually see which part of the stereo field every single instrument uses. It can also be used to analyze an effect chain and see how audio effects influence the stereo image of your content.

Nico Chiara The Soprano Kit WAV

June 24, 2019, 8:45 am

≫ Next: REQ: PARAWAVE - RAPID Synthesizer 1.6.1 (WIN / macOS)

≪ Previous: Blue Cat Stereo Scope Multi v. 2.3 including serial - Mac

$

0

0

FANTASTiC | 24 June 2019 | 26 MB
Nico Chiara - The Soprano Kit

•10x 808
•13x Claps
•08x FX
•13x Hi Hats
•09x Open Hats
•18x Kicks
•19x Percs
•16x Snares
•05x VOX